PRODUCTS
Products

MS201 Elastic Sealant
Classification:
Industrial use
MS201 is one component sealant basing on silyl modified polymer. It can spread and react with moisture to a soft elastic product. The skin formation and curing times relate to the humidity and tempera
MS201 is one component sealant basing on silyl modified polymer. It can spread and react with moisture to a soft elastic product. The skin formation and curing times relate to the humidity and tempera
Specification:
300ml / hard, 570ml / soft, 20L / barrel
Regular color:
Black / White / Gray
Characteristic:
High liquidity, self-leveling sealant.
DTS
MS201 Self-leveling Elastic Sealant
Basis: MS Polymer
MS201 is one component sealant basing on silyl modified polymer. It can spread and react with moisture to a soft elastic product. The skin formation and curing times relate to the humidity and temperature and also depend on its thickness. Higher temperature and moisture can boost its curing and lower temperature as well as low moisture will retard the process.
MS201 can spread and smooth by itself for its lower viscosity, it is suitable to pour into notches or holes for filling and sealing.
Predominance:
With very lower VOC, odorless, free of solvents such as isocyanates, benzene, formaldehyde
Easy spread by itself, Keep smooth after curing.
With hardly any shrinkage, can keep original full shape after curing finish
Keep better elastic strength even during -40℃——100℃.
Good UV resistance and can therefore be used for interior and exterior.
Excellent cohesion for lots of substrates and paints.
Typical Applications:
MS201 is suitable to seal all kinds of holes and grooves in manufacture and repair, including traffic tools, electric equipment, hardware and furniture.
Using example:
For waterproofing and anticorrosion by pouring into the sunken bolts and sunken rivets
Sealing the parts by pouring in the equipment manufacture.
Using in furniture making for sealing.
For spraying as an elastic coating in industry.
Applying indication:
The gaps or the grooves need to be cleaned up and keep dry prior to pouring,to confirm there are no water and grease.
For deeper gap, the sealant in the bottom will take more days to finish cure.
Due to the large kinds of different substrates, especially rubber, plastic and coating, applying trials are necessary prior using.
The suitable working temperature is +15——+40℃,the flowing ability will descend in cold condition, warm it before using in this time.
Technical data sheet
Item
|
Index
|
Reference
|
|
Appearance
|
Color
|
White/gray/black
|
Appraisement by sensory
|
Consistency
|
Flow-able slurry
|
||
Density
|
|
ca. 1.4
|
23℃ x 50%RH
|
Flow
|
Level ability
|
Self-spreading
|
GB/T13477.6
|
Curing speed
|
Skin time
|
ca. 30 min
|
23℃ x 50%RH
|
1days
|
>3.0mm
|
||
7days
|
>7.0mm
|
||
Hardness
|
Shore A
|
ca. 35A
|
ISO 868
|
Tensile strength
|
M100
|
ca. 0.6 MPa
|
ISO 37
|
TB
|
ca. 1.0 MPa
|
||
EB
|
ca. 200%
|
||
Tear propagation
|
|
>10 N/mm
|
ISO 34, Crescent
|
Volume change
|
Shrinkage rate
|
≤1.5%
|
ISO 10563
|
Viscosity
|
|
ca. 15000cp
|
In 23℃
|
Temperature resistance
|
Service Range
|
-40℃~90℃
|
Max 180℃ (<20min)
|
Anti-UV and weather resistance
|
Accelerate aging by Artificial UV
|
No significant changes after 6weeks
|
Test method: Dry UV UV source: 300W/m2 Distance: 25cm, Temperature: 50℃
|
Curing process: 23℃ × 50%RH × 28Days
Notice:
It is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations prior to application. Any applying of the products should comply with local laws.
Packing specification:
570 ml/sausage
300 ml/cartridge
Storing & transporting direction:
Shelf-life: 12months in original packaging.
Recommended storing temperature: 10℃——25℃ (not >45℃).
* Dry and cool condition can help to postpone the shelf-life.
* The shelf-life may be change rely on special packing materials.
* Please refer to the MSDS when handling, and also complying with rules of local law.
Important Notice:
All statements, technical information and recommendations set forth herein are based on our knowledge and experience which we believe to be reliable. However, we do not guarantee their accuracy or completeness. The user should carry out sufficient tests and conduct its own tests of this product to determine proper preparation technique and suitability for proposed application. We do not claim all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose. Any sales of this product shall be on terms and conditions set forth on LEDAR order acknowledgment. Except for cases where we are liable of gross negligence or false intention, we do not accept any liability with regard to the above information or with regard to any verbal recommendation.
Keywords: Sealant | Polyurethane | Modified profiles
Related Products
Online message