PRODUCTS
Products
MS204 Elastic Sealant
Classification:
Industrial use
MS204 is a one component sealant basing on MS polymer. It will cure into an elastic rubber by reaction with moisture of atmosphere after exposed. Besides of humidity, its skin-time and curing speed al
MS204 is a one component sealant basing on MS polymer. It will cure into an elastic rubber by reaction with moisture of atmosphere after exposed. Besides of humidity, its skin-time and curing speed al
Specification:
300ml / hard, 600ml / soft
Regular color:
Black / White / Gray
Characteristic:
General seal and caulk, FDA registered products.
DTS
MS204 Elastic sealant
Basis：MS Polymer
MS204 is a one component sealant basing on MS polymer. It will cure into an elastic rubber by reaction with moisture of atmosphere after exposed. Besides of humidity, its skin-time and curing speed also are relating to the air temperature of surrounding and the joint depth. By increasing the temperature or the moisture, the hardening time can reduce.
MS204 is a general purpose sealant special suitable for dry containers. It can be applied inside and outside of containers with excellent performance for water-proofing.
Prominent advantage:
Odorless and lower VOC, free solvents, environment-friendly and safe.
With hardly any shrinkage, so as to can keeping the original shape after curing finish.
Good cohesion on lots of materials, suit to sealing on timbers, paints and metals.
Good Anti washing, can be applied outside.
Faster curing, can improving manufacture process.
With excellent UV resistance, more than 20years serving-life.
Typical application:
MS204 is recommended to be applied in general cargo containers. It is suitable to join the seams of containers for water-proofing. As well as applied other carriages and cargo boxes.
Using example:
To join the seams of the flooring and sideboards, including doorsill position.
To join the weld seams in sideboard, ceiling and door.
To paste on the rivets and bolts for preventing water leakage and rusting.
Outside sealing, including nameplates, cowls and hinges.
Applying indication:
The pasted spot must be clean, dry, oil and grease free.
Curing process mostly rely on the moisture and temperature, its curing speed will slow down in lower air temperature.
Repairing should be done before skin-forming. It can be painted after curing but recommending to trial.
Its viscosity will climb up in cold weather, to warm it and keep in +15——40℃ when using can get fluency extrusion in this condition.
Technical data sheet:
|
Item
|
Index
|
Reference
|
|
|
Appearance
|
Color
|
Container colors
|
Appraisement by sensory
|
|
Consistency
|
cream
|
||
|
Density
|
g/cm3
|
1.4~1.6
|
23℃ x 50%RH
|
|
Sag resistance
|
slump
|
<1mm
|
GB/T 13477.6
|
|
Curing speed
|
Skin time
|
20~30 min
|
23℃ x 50%RH
|
|
1days(mm)
|
>3.0
|
||
|
7days(mm)
|
>7.0
|
||
|
Hardness
|
Shore A
|
ca. 40
|
ISO 868
|
|
Tensile strength
|
M100
|
ca. 0.8 MPa
|
ISO 37
|
|
TB
|
ca. 1.3 MPa
|
||
|
EB
|
ca. 180%
|
||
|
Peel strength 180°
|
Stainless steel
|
>2.5N/mm, 100%CF
|
ISO 4587
|
|
Volume change
|
Shrinkage rate
|
≤1.5%
|
ISO10563
|
|
Temperature resistance
|
Service Range
|
-40℃~90℃
|
Max 160℃ (<20min)
|
|
Anti-UV and weather resistance
|
Accelerate aging by artificial UV
|
No significant changes after 6weeks
|
Test method: Dry UV UV source: 300W/m2 Distance: 25cm Temperature: 50℃
|
*Curing process: 23℃ × 50%RH × 28Days
Notice:
It is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations prior to application. Any applying of the products should comply with local laws.
Packing specification:
600 ml/sausage
300 ml/cartridge
Storing & transporting direction:
Shelf-life: 9months in original packaging.
Recommended storing temperature: 10℃——25℃ (not >45℃).
* Dry and cool condition can help to postpone the shelf-life.
* The shelf-life may be change rely on special packing materials.
* Please refer to the MSDS when handling, and also complying with rules of local law.
Important Notice:
All statements, technical information and recommendations set forth herein are based on our knowledge and experience which we believe to be reliable. However, we do not guarantee their accuracy or completeness. The user should carry out sufficient tests and conduct its own tests of this product to determine proper preparation technique and suitability for proposed application. We do not claim all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose. Any sales of this product shall be on terms and conditions set forth on LEDAR order acknowledgment. Except for cases where we are liable of gross negligence or false intention, we do not accept any liability with regard to the above information or with regard to any verbal recommendation.
Keywords: Sealant | Polyurethane | Modified profiles
Related Products
Online message
