PRODUCTS
Products
MS510 Elastic Adhesive
Classification:
Flexible bonding
MS510 is a one component adhesive/sealant with no sagging basing on MS Polymer, after contact with moisture
MS510 is a one component adhesive/sealant with no sagging basing on MS Polymer, after contact with moisture
Specification:
20L / barrel
Regular color:
Black / Gray
Characteristic:
Special two-component adhesive. FDA registration
DTS
MS-510 Elastic Adhesive/sealant
Basing on MS Polymer
MS510 is a one component adhesive/sealant with no sagging basing on MS Polymer, after contact with moisture, it will hardening step by step and change into an elastic product. Its curing speed depends on the humidity and temperature in surrounding, the higher air temperature or higher humidity will promote its curing schedule.
MS510 possess higher module and higher tensile strength, with permanence elastic and no shrinking, it is suit for elastic bounding and higher module sealing.
Prominent advantage:
With no contain solvent, PVC, lower VOC, environment friendly.
Hardly any shrinking, with less disfigurement after finishing curing.
Possess good adhesion to a very wide range of substrates.
Excellent aging characteristics, anti-UV, with more than 20years service life.
Good withstanding fatigue, excellent on anti-vibrate and anti-impact
Applications:
MS 510 Adhesive/Sealant has excellent bonding ability to all kinds of substrates, such as aluminum, stainless steel, copper, most painted metal surfaces, PVC, polyester, ceramic, glass, painted and lacquered wood etc. It is general used as elastic adhesive or higher module sealant.
When faster curing speed needed, it is suitable for used as a 2-component adhesive by coupling with LEDAR MS6010.
Typical applications:
Sealing the seam in manufacturing, including butt joint and lap joint.
For assembling parts by elastic bonding in equipment manufacturing.
Bonding and sealing the parts in electric.
To bond the boards of carriage.
Using Instructions:
The surface being bound must keep clean, dry and keeping dust or grease free.
For bad rusty surface of metal (such as aluminum oxide, iron rust, copper rust), it should be burnished before bonded.
When used for elastic bounding, to joint up before skinning.
It can be extruded easily with a hand or air pressure gun at +5 —— +40℃. When it cold down, put it in worm place for a period of time before using.
Technology data:
|
Item
|
Index
|
Reference
|
|
|
Appearance quality
|
color
|
White, gray, dark
|
Appraisement by sensory
|
|
shape
|
cream
|
||
|
Density
|
g/cm3
|
ca. 1.45
|
Tested under 23℃
|
|
Sag resistance
|
slump
|
<1mm
|
ISO 7390
|
|
Curing speed
|
Skin time
|
ca.15min
|
DIN50014 , 23℃ X 50RH%
|
|
1days(mm)
|
>3.0
|
||
|
7days(mm)
|
>8.0
|
||
|
Hardness
|
Shore A
|
ca. 60
|
ISO 868
|
|
Tensile properties
|
M100(MPa)
|
ca. 2.3
|
ISO 37
|
|
TB（MPa）
|
＞3.2
|
||
|
EB（%）
|
ca. 200%
|
||
|
Tear strength
|
N/mm
|
>12
|
ISO 34, Crescent piece
|
|
Lap-Shear strength
|
MPa
|
>2.3
|
ISO 4587, Material: Stainless steel
|
|
Destroy type
|
100%CF
|
||
|
Shrinkage
|
Shrinkage of volume
|
≤1.0%
|
DIN 52451
|
|
Servicing temperature
|
|
-45℃~100℃
|
ISO 4663
|
|
Weather-proofing ability
|
Accelerate aging by Artificial UV
|
No significant changes on the sealant after 6weeks
|
Test method: Dry UV UV source: 300W/m2 Distance: 25cm Temperature: 50℃
|
* Curing process: 23℃ × 50%RH × 28Days
* CF: cohesion destroy failure。
Notice:
It is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations prior to application. Any applying of the products should comply with local laws.
Packing specification:
600 ml/sausage, 290 ml/cartridge
Storing & transporting direction:
Shelf-life: 12months in original packaging.
Recommended storing temperature: 10℃——25℃ (not >45℃).
* Dry and cool condition can help to postpone the shelf-life.
* The shelf-life may be change rely on special packing materials.
* Please refer to the MSDS when handling, and also complying with rules of local law.
Important Notice:
All statements, technical information and recommendations set forth herein are based on our knowledge and experience which we believe to be reliable. However, we do not guarantee their accuracy or completeness. The user should carry out sufficient tests and conduct its own tests of this product to determine proper preparation technique and suitability for proposed application. We do not claim all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose. Any sales of this product shall be on terms and conditions set forth on LEDAR order acknowledgment. Except for cases where we are liable of gross negligence or false intention, we do not accept any liability with regard to the above information or with regard to any verbal recommendation.
Keywords: Sealant | Polyurethane | Modified profiles
Related Products
Online message
