PRODUCTS
Products
MS530 Elastic Adhesive
Classification:
Flexible bonding
MS530 is a one component Adhesive with no sagging based on SMP Polymer, which can cures into an elastomer by acting with the moisture.
MS530 is a one component Adhesive with no sagging based on SMP Polymer, which can cures into an elastomer by acting with the moisture.
Specification:
20L / barrel
Regular color:
Black / Gray
Characteristic:
Special two-component adhesive. FDA registration
DTS
MS530 Elastic Adhesive
Basing: silyl modified Polymer
MS530 is a one component Adhesive with no sagging based on SMP Polymer, which can cures into an elastomer by acting with the moisture. The skin formation and curing times are dependent on humidity and temperature. By increasing the temperature and moisture these times can be reduced, low temperature as well as low moisture will retard the process.
Product Feature：
With higher tensile strength and elastic recovery ability, especially suit for elastic bonding.
Environment friendly, with no PVC, lower VOC, solvent free,
Very lower shrinking rate, less disfigurement after finishing curing.
Possess good adhesion to a very wide range of substrates.
Excellent aging characteristics, anti-UV, with more 20years service life.
Application：
MS530 possess higher cohesion for most of materials, usually used for bonding different materials instead of welding and riveting, the bond can well resistance vibrating and impacting as well as adapting the displacement coming from different material expanding. It is also usually used for bonding parts and jointing boards in manufacture.
Typical applied:
For elastic bonding the metal and plastic in manufacturing such as box, aerator and show window.
Fixing the parts and bonding the board in cab and moving staircase.
To assemble the parts and board by elastic bonding made by glass, wooden, plastic and metal instead of riveting in furniture, cabinet, etc.
Using Instructions:
The surface being bound must keep clean, dry and keeping dust or grease free. For bad rusty surface of metal (such as aluminum oxide, iron rust, copper rust), it should be burnished before bonded.
The color should be grey and uniform after extruded from mixing tube. If not, the mixing effect needs to be taken into account.
The working life less 20min in 23℃ after mixed, when used for elastic bounding, the joint need to be mated up before skin forming (with no glue adhering on finger when touch slightly).
During the curing of adhesive and forming adhere ( 1day in 23℃), the continual impacting and vibrating come from external may lead to cohesive failure.
Due to especial or complicated materials and the large number different substrates, prior application trials are necessary before use.
It can be extruded easily and preferable mixing effect at +15 —— +40℃. When it cold down, put it in worm place for a period of time before using).
Technical data：
|
Item
|
Index
|
Reference
|
|
|
Appearance
|
color
|
White, gray, dark
|
Appraisement by sensory
|
|
shape
|
cream
|
||
|
Density
|
g/cm3
|
1.4~1.5
|
Tested under 23℃
|
|
Sag resistance
|
slump
|
<1mm
|
ISO 7390
|
|
Curing speed
|
Skin time
|
10min
|
DIN50014 , 23℃ X 50RH%
|
|
1days(mm)
|
>3mm
|
||
|
7days(mm)
|
>8mm
|
||
|
Hardness
|
Shore A
|
68A
|
ISO 868
|
|
Tensile properties
|
TS
|
＞4.0 MPa
|
ISO 37
|
|
M100
|
ca. 3.0
|
||
|
EB（%）
|
ca. 150%
|
||
|
Lap-Shear strength
|
SST
|
>3.0MPa
|
ISO 4587, Material: Stainless steel
|
|
Destroy state
|
100%CF
|
||
|
Shrinkage
|
Shrinkage rate
|
≤1.0%
|
DIN 52451
|
|
Temperature resistance
|
Service Range
|
-40℃~90℃
|
Max 180℃ (<20min)
|
|
Weather-proofing ability
|
Accelerate aging by Artificial UV
|
No significant changes on the sealant after 6weeks
|
Test method: Dry UV UV source: 300W/m2 Distance: 25cm Temperature: 50℃
|
CF, Cohesion failure; AF, Adhesion failure.
Curing condition: at 23℃50%RH for 28 days
Warning:
It is necessary to read the MSDS prior to application. More product information is fetched from LEDAR.
Storage direction:
It is frost-sensitive and should be stored in dry and lower temperature. Recommended storing temperature: 15℃——25℃ (not <10℃ and >50℃).
Shelf-life: usually 9months in original packaging. It will be shorten by different packing materials, real time rely on the label.
Packing & transporting:
600 ml/sausage，290 ml/cartridge
Important statement:
All statements, technical information and recommendations set forth herein are based on tests which we believe to be reliable. However, we do not guarantee their accuracy or completeness. The user should conduct its own tests of this product before use to determine proper preparation technique and suitability for proposed application. Any sales of this product shall be on terms and conditions set forth on LEDAR order acknowledgment. LEDAR warrants that the product conforms to our written specifications and is free from defects at the time of shipment. We do not claim all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose. The buyer’s sole remedy for noncompliance with this warranty shall be for the replacement of the product or refund of the buyer’s purchase price. In no case will LEDAR be liable for direct, consequential economic or other damages.
Keywords: Sealant | Polyurethane | Modified profiles
Related Products
Online message
